Certificate IV in Engineering

Code:
MEM40105
Government-subsidised training
Recognition
Meets the requirements of the Australian Qualifications Framework (AQF)
Entry requirements
Certificate III in the metals industry
Units in this course
Fee range
$2,496 - $26,600 (full fee)
$576 - $5,750
Choose and compare provider locations
This course is offered in 21 locations
Select two options to compare
You have filtered by: ""
View provider information
Select to compare
Charleston Road (BENDIGO)
TAFE
Frankston
TAFE
Melbourne
TAFE
External
TAFE
Fulham
TAFE
Traralgon
TAFE
Yallourn (NEWBOROUGH)
TAFE
SMB (Ballarat)
TAFE
Docker Street, Wangaratta
TAFE
1 - 10 of 21 providers
Page 1 of 3
0 of 2 selected to compare


About government-subsidised training

Students may be eligible for government-subsidised training. This is only offered by training providers who have a contract with the Victorian Government to deliver government-subsidised training.

If you're eligible, the government will contribute to the cost of the training.




Finding government-subsidised training

Government-subsidised training is marked with this symbol Government-subsidised training available. Course availability data is sourced from the Australian Course Information Register.

About pre-apprenticeship courses

This course is available to study as a pre-apprenticeship. A pre-apprenticeship is a great way to get a feel for the industry before committing to an apprenticeship.

Some pre-apprenticeships can help reduce the length of a formal apprenticeship. This only applies to selected courses approved by the Victorian Registration and Qualifications Authority (VRQA). To find out if this applies to your pre-apprenticeship contact your training provider.

For more information about pre-apprenticeships, see our Pre-Apprenticeships page.

About recognition

The courses shown on the Victorian Skills Gateway website are regulated qualifications under the Australian Qualifications Framework (AQF), or short training programs made up of units of competency from regulated qualifications.

Units
Unit code
Unit title
AURV225908A
Carry out panel repairs
ICTTC136B
Install, maintain and modify customer premises communications cabling: ACA Restricted Rule
ICTTC137B
Install, maintain and modify customer premises communications cabling: ACA Open Rule
MEM03001B
Perform manual production assembly
MEM03002B
Perform precision assembly
MEM03003B
Perform sheet and plate assembly
MEM03004B
Perform electronic/electrical assembly (production)
MEM03005B
Rework and repair (electrical/electronic production)
MEM03006B
Set assembly stations
MEM04001B
Operate melting furnaces
MEM04002B
Perform gravity die casting
MEM04003B
Operate pressure die casting machine
MEM04004B
Prepare and mix sand for metal moulding
MEM04005C
Produce moulds and cores by hand (jobbing)
MEM04006B
Operate sand moulding and core making machines
MEM04007B
Pour molten metal
MEM04008B
Fettle and trim metal castings/forgings
MEM04010B
Develop and manufacture wood patterns
MEM04011B
Produce polymer patterns
MEM04012B
Assemble plated patterns
MEM04013B
Develop and manufacture polystyrene patterns
MEM04014B
Develop and manufacture production patterns
MEM04015B
Develop and manufacture vacuum forming moulds and associated equipment
MEM04016C
Develop and manufacture precision models
MEM04017B
Develop and manufacture gear, conveyor screw and propeller patterns
MEM04018B
Perform general woodworking machine operations
MEM04019B
Perform refractory installation and repair
MEM04020A
Supervise individual ferrous melting and casting operation
MEM04021A
Supervise individual non ferrous melting and casting operation
MEM04022A
Examine appropriateness of methoding for mould design
MEM04023A
Undertake prescribed tests on foundry related materials
MEM05001B
Perform manual soldering/desoldering - electrical/electronic components
MEM05002B
Perform high reliability soldering and desoldering
MEM05003B
Perform soft soldering
MEM05004C
Perform routine oxy acetylene welding
MEM05005B
Carry out mechanical cutting
MEM05006B
Perform brazing and/or silver soldering
MEM05007C
Perform manual heating and thermal cutting
MEM05008C
Perform advanced manual thermal cutting, gouging and shaping
MEM05009C
Perform automated thermal cutting
MEM05010C
Apply fabrication, forming and shaping techniques
MEM05011D
Assemble fabricated components
MEM05012C
Perform routine manual metal arc welding
MEM05013C
Perform manual production welding
MEM05014C
Monitor quality of production welding/fabrications
MEM05015D
Weld using manual metal arc welding process
MEM05016C
Perform advanced welding using manual metal arc welding process
MEM05017D
Weld using gas metal arc welding process
MEM05018C
Perform advanced welding using gas metal arc welding process
MEM05019D
Weld using gas tungsten arc welding process
MEM05020C
Perform advanced welding using gas tungsten arc welding process
MEM05022C
Perform advanced welding using oxy acetylene welding process
MEM05023C
Weld using submerged arc welding process
MEM05024B
Perform welding supervision
MEM05025C
Perform welding/fabrication inspection
MEM05026C
Apply welding principles
MEM05036C
Repair/replace/modify fabrications
MEM05037C
Perform geometric development
MEM05038B
Perform advanced geometric development - cylindrical/rectangular
MEM05039B
Perform advanced geometric development - conical
MEM05040B
Perform advanced geometric development - transitions
MEM05041B
Weld using powder flame spraying
MEM05042B
Perform welds to code standards using flux core arc welding process
MEM05043B
Perform welds to code standards using gas metal arc welding process
MEM05044B
Perform welds to code standards using gas tungsten arc welding process
MEM05045B
Perform pipe welds to code standards using manual metal arc welding process
MEM05046B
Perform welds to code standards using manual metal arc welding process
MEM05047B
Weld using flux core arc welding process
MEM05048B
Perform advanced welding using flux core arc welding process
MEM05049B
Perform routine gas tungsten arc welding
MEM05050B
Perform routine gas metal arc welding
MEM05051A
Select welding processes
MEM05052A
Apply safe welding practices
MEM05053A
Set and edit computer controlled thermal cutting machines
MEM05054A
Write basic NC/CNC programs for thermal cutting machines
MEM06001B
Perform hand forging
MEM06002B
Perform hammer forging
MEM06003C
Carry out heat treatment
MEM06004B
Select heat treatment processes and test finished product
MEM06005B
Perform drop and upset forging
MEM06006C
Repair springs
MEM06007B
Perform basic incidental heat/quenching, tempering and annealing
MEM06008A
Hammer forge complex shapes
MEM06009A
Hand forge complex shapes
MEM07001B
Perform operational maintenance of machines/equipment
MEM07002B
Perform precision shaping/planing/slotting operations
MEM07003B
Perform machine setting (routine)
MEM07004B
Perform machine setting (complex)
MEM07005C
Perform general machining
MEM07006C
Perform lathe operations
MEM07007C
Perform milling operations
MEM07008D
Perform grinding operations
MEM07009B
Perform precision jig boring operations
MEM07010B
Perform tool and cutter grinding operations
MEM07011B
Perform complex milling operations
MEM07012B
Perform complex grinding operations
MEM07013B
Perform machining operations using horizontal and/or vertical boring machines
MEM07014B
Perform electro-discharge (EDM) machining operations
MEM07015B
Set computer controlled machines/processes
MEM07016C
Set and edit computer controlled machines/processes
MEM07018C
Write basic NC/CNC programs
MEM07019C
Program NC/CNC machining centre
MEM07020C
Program multiple spindle and/or multiple axis NC/CNC machining centre
MEM07021B
Perform complex lathe operations
MEM07022C
Program CNC wire cut machines
MEM07023C
Program and set up CNC manufacturing cell
MEM07024B
Operate and monitor machine/process
MEM07025B
Perform advanced machine/process operation
MEM07026B
Perform advanced plastic processing
MEM07027B
Perform advanced press operations
MEM07028B
Operate computer controlled machines/processes
MEM07029B
Perform routine sharpening/maintenance of production tools and cutters
MEM07030C
Perform metal spinning lathe operations (basic)
MEM07031C
Perform metal spinning lathe operations (complex)
MEM07032B
Use workshop machines for basic operations
MEM07033B
Operate and monitor basic boiler
MEM07034A
Operate and monitor intermediate class boiler
MEM07039A
Write programs for industrial robots
MEM07040A
Set multistage integrated processes
MEM08001B
Perform wire, jig and barrel load/unload work
MEM08002C
Pre-treat work for subsequent surface coating
MEM08003C
Perform electroplating operations
MEM08004B
Finish work using wet, dry and vapour deposition methods
MEM08005B
Prepare and produce specialised coatings
MEM08006B
Produce clear and/or coloured and/or sealed anodised films on aluminium
MEM08007B
Control surface finish production and finished product quality
MEM08008B
Operate and control surface finishing waste treatment process
MEM08009C
Make up solutions
MEM08010B
Manually finish/polish materials
MEM08011B
Prepare surfaces using solvents and/or mechanical means
MEM08012B
Prepare surfaces by abrasive blasting (basic)
MEM08013B
Prepare surfaces by abrasive blasting (advanced)
MEM08014B
Apply protective coatings (basic)
MEM08015B
Apply protective coatings (advanced)
MEM08016B
Control blast coating by-products, materials and emissions
MEM08018B
Electroplate engineering coatings
MEM08019B
Electroplate protective finishes
MEM08020B
Electroplate decorative finishes
MEM09002B
Interpret technical drawing
MEM09003B
Prepare basic engineering drawing
MEM09004B
Perform electrical/electronic detail drafting
MEM09005B
Perform basic engineering detail drafting
MEM09006B
Perform advanced engineering detail drafting
MEM09007B
Perform advanced mechanical detail drafting
MEM09008B
Perform advanced structural detail drafting
MEM09009C
Create 2D drawings using computer aided design system
MEM09010C
Create 3D models using computer aided design system
MEM09011B
Apply basic engineering design concepts
MEM09021B
Interpret and produce curved 3-dimensional shapes
MEM09022A
Create 2D code files using computer aided manufacturing system
MEM09023A
Create 3D code files using computer aided manufacturing system
MEM10001C
Erect structures
MEM10002B
Terminate and connect electrical wiring
MEM10003B
Install and test electrical wiring and circuits up to 1000 volts a.c. and 1500 volts d.c.
MEM10004B
Enter and change programmable controller operational parameters
MEM10005B
Commission programmable controller programs
MEM10006B
Install machine/plant
MEM10007C
Modify control systems
MEM10008B
Undertake commissioning procedures for plant and/or equipment
MEM10009B
Install refrigeration and air conditioning plant and equipment
MEM10010B
Install pipework and pipework assemblies
MEM10011B
Terminate and connect specialist cables
MEM10013A
Install split air conditioning systems and associated pipework
MEM11001C
Erect/dismantle scaffolding and equipment
MEM11002C
Erect/dismantle complex scaffolding and equipment
MEM11003B
Coordinate erection/dismantling of complex scaffolding/equipment
MEM11004B
Undertake dogging
MEM11005B
Pick and process order
MEM11006B
Perform production packaging
MEM11007B
Administer inventory procedures
MEM11008B
Package materials (stores and warehouse)
MEM11009B
Handle/move bulk fluids/gases
MEM11010B
Operate mobile load shifting equipment
MEM11011B
Undertake manual handling
MEM11012B
Purchase materials
MEM11013B
Undertake warehouse receival process
MEM11014B
Undertake warehouse dispatch process
MEM11015B
Manage warehouse inventory system
MEM11016B
Order materials
MEM11017B
Organise and lead stocktakes
MEM11018B
Organise and maintain warehouse stock receival and/or dispatch system
MEM11019B
Undertake tool store procedures
MEM11020B
Perform advanced warehouse computer operations
MEM11021B
Perform advanced operation of load shifting equipment
MEM11022B
Operate fixed/moveable load shifting equipment
MEM12001B
Use comparison and basic measuring devices
MEM12002B
Perform electrical/electronic measurement
MEM12003B
Perform precision mechanical measurement
MEM12004B
Perform precision electrical/electronic measurement
MEM12005B
Calibrate measuring equipment
MEM12006C
Mark off/out (general engineering)
MEM12007D
Mark off/out structural fabrications and shapes
MEM12019B
Measure components using coordinate measuring machines
MEM12020B
Set and operate coordinate measuring machines
MEM12021B
Program coordinate measuring machines
MEM12022B
Program coordinate measuring machines (advanced)
MEM12023A
Perform engineering measurements
MEM12024A
Perform computations
MEM12025A
Use graphical techniques and perform simple statistical computations
MEM13001B
Perform emergency first aid
MEM13002B
Undertake occupational health and safety activities in the workplace
MEM13003B
Work safely with industrial chemicals and materials
MEM13004B
Work safely with molten metals/glass
MEM13006B
Collect and evaluate occupational health and safety data for an enterprise or section of an enterprise
MEM13007B
Maintain water treatment systems for cooling towers
MEM13010A
Supervise occupational health and safety in an industrial work environment.
MEM13013B
Work safely with ionizing radiation
MEM13014A
Apply principles of occupational health and safety in the work environment
MEM14001B
Schedule material deliveries
MEM14002B
Undertake basic process planning
MEM14003B
Undertake basic production scheduling
MEM14004A
Plan to undertake a routine task
MEM14005A
Plan a complete activity
MEM15001B
Perform basic statistical quality control
MEM15002A
Apply quality systems
MEM15003B
Use improvement processes in team activities
MEM15004B
Perform inspection
MEM15005B
Select and control inspection processes and procedures
MEM15007B
Conduct product and/or process capability studies
MEM15008B
Perform advanced statistical quality control
MEM15010B
Perform laboratory procedures
MEM15011B
Exercise external quality assurance
MEM15012B
Maintain/supervise the application of quality procedures
MEM15015B
Examine trading practices
MEM15016B
Inspect pre-packed articles
MEM15017B
Use and maintain reference standards
MEM15018B
Investigate consumer complaints
MEM15019B
Conduct a field inspection
MEM15020C
Perform verification/certification or in-service inspection
MEM15021C
Conduct audits of servicing licensees and public weighbridge licensees
MEM15022B
Verify reference standards
MEM15024A
Apply quality procedures
MEM16001B
Give formal presentations and take part in meetings
MEM16002C
Conduct formal interviews and negotiations
MEM16003B
Provide advanced customer service
MEM16004B
Perform internal/external customer service
MEM16005A
Operate as a team member to conduct manufacturing, engineering or related activities
MEM16006A
Organise and communicate information
MEM16007A
Work with others in a manufacturing, engineering or related environment
MEM16008A
Interact with computing technology
MEM16009A
Research and analyse engineering information
MEM16010A
Write reports
MEM16011A
Communicate with individuals and small groups
MEM16012A
Interpret technical specifications and manuals
MEM16013A
Operate in a self-directed team
MEM16014A
Report technical information
MEM17001B
Assist in development and deliver training in the workplace
MEM17002B
Conduct workplace assessment
MEM17003A
Assist in the provision of on the job training
MEM18001C
Use hand tools
MEM18002B
Use power tools/hand held operations
MEM18003C
Use tools for precision work
MEM18004B
Maintain and overhaul mechanical equipment
MEM18005B
Perform fault diagnosis, installation and removal of bearings
MEM18006C
Repair and fit engineering components
MEM18007B
Maintain and repair mechanical drives and mechanical transmission assemblies
MEM18008B
Balance equipment
MEM18009B
Perform levelling and alignment of machines and engineering components
MEM18010C
Perform equipment condition monitoring and recording
MEM18011C
Shut down and isolate machines/equipment
MEM18012B
Perform installation and removal of mechanical seals
MEM18013B
Perform gland packing
MEM18014B
Manufacture press tools and gauges
MEM18015B
Maintain tools and dies
MEM18016B
Analyse plant and equipment condition monitoring results
MEM18017C
Modify mechanical systems and equipment
MEM18018C
Maintain pneumatic system components
MEM18019B
Maintain pneumatic systems
MEM18020B
Maintain hydraulic system components
MEM18021B
Maintain hydraulic systems
MEM18022B
Maintain fluid power controls
MEM18023B
Modify fluid power system operation
MEM18024B
Maintain engine cooling systems
MEM18025B
Service combustion engines
MEM18026C
Test compression ignition fuel systems
MEM18027C
Overhaul engine fuel system components
MEM18028B
Maintain engine lubrication systems
MEM18029B
Tune diesel engines
MEM18030B
Diagnose and rectify low voltage electrical systems
MEM18031B
Diagnose and rectify low voltage starting systems
MEM18032B
Maintain induction/exhaust systems
MEM18033B
Perform engine bottom-end overhaul
MEM18034B
Perform engine top-end overhaul
MEM18035B
Diagnose and rectify braking systems
MEM18037B
Diagnose and rectify low voltage charging systems
MEM18038B
Maintain wheels and tyres
MEM18039B
Diagnose and rectify track type undercarriage
MEM18040B
Maintain suspension systems
MEM18041B
Maintain steering systems
MEM18042C
Diagnose and rectify manual transmissions
MEM18043C
Diagnose and rectify automatic transmissions
MEM18044C
Diagnose and rectify drive line and final drives
MEM18045B
Fault find/repair electrical equipment/components up to 250 volts single phase supply
MEM18046B
Fault find/repair electrical equipment/components up to 1000 volts a.c./1500 volts d.c.
MEM18047B
Diagnose and maintain electronic controlling systems on mobile plant
MEM18048B
Fault find and repair/rectify basic electrical circuits
MEM18049C
Disconnect/reconnect fixed wired equipment up to 1000 volts a.c./1500 volts d.c.
MEM18050C
Disconnect/reconnect fixed wired equipment over 1000 volts a.c./1500 volts d.c.
MEM18051B
Fault find and repair/rectify complex electrical circuits
MEM18052B
Maintain fluid power systems for mobile plant
MEM18053B
Modify fluid power control systems
MEM18054B
Fault find, test and calibrate instrumentation systems and equipment
MEM18055B
Dismantle, replace and assemble engineering components
MEM18056B
Diagnose and repair analog equipment and components
MEM18057B
Maintain/service analog/digital electronic equipment
MEM18058C
Modify electronic equipment
MEM18059B
Modify electronic systems
MEM18060B
Maintain, repair control instrumentation - single and multiple loop control systems
MEM18061B
Maintain/calibrate complex control systems
MEM18062B
Install, maintain and calibrate instrumentation sensors, transmitters and final control elements
MEM18063B
Terminate signal and data cables
MEM18064B
Maintain instrumentation system components
MEM18065B
Diagnose and repair digital equipment and components
MEM18066B
Diagnose and repair microprocessor-based equipment
MEM18067B
Tune control loops - multi controller or multi element systems
MEM18069B
Maintain, repair instrumentation process control analysers
MEM18070C
Modify complex electrical circuits and systems
MEM18071B
Connect/disconnect fluid conveying system components
MEM18072B
Manufacture fluid conveying conductor assemblies
MEM18073A
Perform advanced equipment testing and diagnostics on mobile plant and equipment
MEM18084A
Commission and decommission split air conditioning systems
MEM18085A
Install, service and repair domestic air conditioning and refrigeration appliances
MEM18086B
Test, recover, evacuate and charge refrigeration systems
MEM18087B
Service and repair domestic and light commercial refrigeration and air conditioning equipment
MEM18088B
Maintain and repair commercial air conditioning systems and components
MEM18089B
Maintain and repair central air handling systems
MEM18090B
Maintain and repair industrial refrigeration systems and components
MEM18091B
Maintain and repair multi stage, cascade and/or ultra-cold industrial refrigeration systems
MEM18092B
Maintain and repair commercial and/or industrial refrigeration and/or air conditioning controls
MEM18093B
Maintain and repair integrated industrial refrigeration and/or large air handling system controls
MEM18094B
Service and repair commercial refrigeration
MEM18095A
Maintain and repair cooling towers/evaporative condensers and associated equipment
MEM18096A
Maintain, repair/replace and adjust refrigerant flow controls and associated equipment
MEM18097A
Manufacture cavity dies
MEM18098A
Prepare to perform work associated with fuel system installation and servicing
MEM19001B
Perform jewellery metal casting
MEM19002B
Prepare jewellery illustrations
MEM19003B
Handle gem materials
MEM19004B
Handle and examine gemstone materials
MEM19005B
Produce three-dimensional precision items
MEM19006B
Replace watch batteries
MEM19007B
Perform gemstone setting
MEM19008B
Prepare jewellery designs
MEM19009B
Perform investment procedures for lost wax casting process
MEM19010B
Produce rubber moulds for lost wax casting process
MEM19011B
Perform wax injection of moulds for lost wax casting process
MEM19012B
Produce jewellery wax model
MEM19013B
Produce jewellery metal masters
MEM19014B
Perform hand engraving
MEM19015B
Perform jewellery enamelling
MEM19016B
Construct jewellery components
MEM19017B
Fabricate jewellery items
MEM19018B
Repair jewellery items
MEM19020B
Fault-find and maintain micro-mechanisms
MEM19021B
Diagnose and service micro-mechanisms
MEM19022B
Perform precision micro-mechanism diagnosis and servicing
MEM20001A
Produce keys
MEM20002A
Assemble and test lock mechanisms
MEM20003A
Install and upgrade locks and hardware
MEM20004A
Gain entry
MEM20005A
Install and maintain door control devices/systems
MEM20006A
Maintain and service mechanical locking devices
MEM20007A
Plan and prepare a masterkey system
MEM20008A
Develop and implement a masterkey system
MEM20009A
Gain entry and reinstate fire and security containers
MEM20010A
Gain entry and reinstate automotive locking systems
MEM20011A
Service and repair fire and security containers
MEM20012A
Service and repair mechanical automotive locking systems
MEM20013A
Service automotive transponder systems
MEM20014A
Perform a site security survey
MEM21001A
Replace watch batteries, capacitors and bands
MEM21002A
Perform watch movement exchange
MEM21003A
Perform watch case servicing, repair and refurbishment
MEM21004A
Clean watch and clock components
MEM21005A
Diagnose faults in quartz watches
MEM21006A
Service quartz watches
MEM21007A
Service complex quartz watches
MEM21008A
Service mechanical watches
MEM21009A
Inspect, diagnose, adjust and repair mechanical watches
MEM21010A
Service watch power generating systems
MEM21011A
Service calendar and other dial indication mechanisms for watches
MEM21012A
Service and repair mechanical watch oscillating systems
MEM21013A
Service, test and adjust watch escapements
MEM21014A
Service mechanical chronograph watches
MEM21015A
Perform precision watch timing and adjustment
MEM21016A
Install and set up clocks
MEM21017A
Service and repair clock timepieces
MEM21018A
Service clock escapements and oscillating systems
MEM21019A
Service and repair clock striking mechanisms
MEM21020A
Service and repair clock chiming mechanisms
MEM21021A
Restore clockwork mechanisms
MEM21022A
Manufacture watch and clock components
MEM21023A
Plan, set up and operate horological workshop or service centre
MEM24001B
Perform basic penetrant testing
MEM24002B
Perform penetrant testing
MEM24003B
Perform basic magnetic particle testing
MEM24004B
Perform magnetic particle testing
MEM24005B
Perform basic eddy current testing
MEM24006B
Perform eddy current testing
MEM24007B
Perform ultrasonic thickness testing
MEM24008B
Perform ultrasonic testing
MEM24009B
Perform basic radiographic testing
MEM24010B
Perform radiographic testing
MEM24011B
Establish non-destructive tests
MEM24012C
Apply metallurgy principles
MEM25001B
Apply fibre-reinforced materials
MEM25002B
Form and integrate fibre-reinforced structures
MEM25003B
Set up marine vessel structures
MEM25004B
Fair and shape surfaces
MEM25005B
Construct and assemble marine vessel timber components
MEM25006B
Undertake marine sheathing operations
MEM25007B
Maintain marine vessel surfaces
MEM25008B
Repair marine vessel surfaces and structures
MEM25009B
Form timber shapes using hot processes
MEM25010B
Perform fitout procedures
MEM25011B
Install marine systems
MEM25012B
Install and test operations of marine auxiliary systems
MEM25013B
Produce three-dimensional plugs/moulds
MEM25014B
Perform marine slipping operations
MEM25015A
Assemble and install equipment and accessories/ancillaries
MEM30012A
Apply mathematical techniques in a manufacturing engineering or related environment
MEM30025A
Analyse a simple electrical system circuit
MEM50002B
Work safely on marine craft
MEM50003B
Follow work procedures to maintain the marine environment
MEM50004B
Maintain quality of environment by following marina codes
MEM50009B
Safely operate a mechanically powered recreational boat
MSAENV272B
Participate in environmentally sustainable work practices
MSAENV472B
Implement and monitor environmentally sustainable work practices
MSATCM304A
Interpret basic binary phase diagrams
PMBPROD291B
Operate resin infusion moulding equipment
PMBPROD294B
Operate resin transfer moulding equipment
PMBPROD298B
Operate equipment using pre-preg material
PMBPROD391B
Produce composites using resin infusion
PMBPROD394B
Produce composites using resin transfer moulding
PMBPROD398B
Produce composites using pre-pregs
PRSTS202A
Install security equipment/system
PRSTS302A
Program security equipment/system
PRSTS303A
Test installed security equipment/system
PRSTS304A
Commission/decommission security equipment/system
PRSTS305A
Identify and diagnose electronic security equipment/ system fault
PRSTS307A
Maintain and service security equipment/system
PRSTS317A
Provide estimate and quote
PRSTS319A
Modify and repair security equipment/system
TLILIC0012A
Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)
TLILIC2001A
Licence to operate a forklift truck
About the fee range
The fee ranges shown are indicative only.

The full fee range does not factor in any government subsidies.

The government-subsidised fee range marked with this symbol Government-subsidised training available factors in a Victorian Government subsidy.

The ranges are based on:

  • Estimated tuition fees for the whole of the course with a Victorian Government subsidy 
  • Rates for local students only (not for international)  
  • Available data from the Australian Course Information Register

The fee ranges shown do not factor in concessions or scholarships. They also exclude other fees set by the training provider such as materials, services, and amenities.

All subsidies presented on this site are correct at the time of publication; subsidy information is updated on a monthly basis. To obtain the most accurate quote for the course you’re considering, please contact the training provider directly.

About occupations in demand

Occupations in demand are marked with this symbol Occupation in demand. If you see a related job marked with this symbol, it’s identifying a role that is currently, or is at risk of, experiencing a skills shortage.

When an occupation has a skills shortage, it means the chances of getting a job after completing your course could be higher.

The information used to identify occupations in demand is primarily sourced from Higher Education and Skills Group (HESG) in the Department of Education and Training (DET), the Australian Bureau of Statistics (ABS) and Deloitte Access Economics.