Certificate III in Engineering - Mechanical Trade

Code:
MEM30205
Government-subsidised training
Recognition
Meets the requirements of the Australian Qualifications Framework (AQF)
Entry requirements
No minimum education; employed in relevant field plus training contract and adequate literacy and numeracy skills; or registered with an Australian Apprenticeship Centre
Units in this course
Fee range
$2,203 - $22,320*
Choose and compare provider locations
This course is offered in 27 locations
Select two options to compare
You have filtered by: ""
View provider information
Select to compare
Charleston Road (BENDIGO)
TAFE
Box Hill
TAFE
Frankston
TAFE
Melbourne
TAFE
Fulham
TAFE
Yallourn (NEWBOROUGH)
TAFE
SMB (Ballarat)
TAFE
Docker Street, Wangaratta
TAFE
Fryers Street, Shepparton
TAFE
1 - 10 of 27 providers
Page 1 of 3
0 of 2 selected to compare


About government-subsidised training

Students may be eligible for government-subsidised training. This is only offered by training providers who have a contract with the Victorian Government to deliver government-subsidised training.

If you're eligible, the government will contribute to the cost of the training.




Finding government-subsidised training

Government-subsidised training is marked with this symbol Government-subsidised training available. Our course listings are current for 2017. Course availability data is sourced from the Australian Course Information Register.

Our listings also identify TAFEs who offer government-subsidised training for specific courses. Other training providers who offer government-subsidised training will be identified as this information becomes available.

About pre-apprenticeship courses

This course is available to study as a pre-apprenticeship. A pre-apprenticeship is a great way to get a feel for the industry before committing to an apprenticeship.

Some pre-apprenticeships can help reduce the length of a formal apprenticeship. This only applies to selected courses approved by the Victorian Registration and Qualifications Authority (VRQA). To find out if this applies to your pre-apprenticeship contact your training provider.

For more information about pre-apprenticeships, see our Pre-Apprenticeships page.

About recognition

The courses shown on the Victorian Skills Gateway website are either regulated qualifications under the Australian Qualifications Framework (AQF), or short training programs made up of units of competency from regulated qualifications.

Units
Unit code
Unit title
MEM07001B
Perform operational maintenance of machines/equipment
MEM07002B
Perform precision shaping/planing/slotting operations
MEM07003B
Perform machine setting (routine)
MEM07004B
Perform machine setting (complex)
MEM07005C
Perform general machining
MEM07006C
Perform lathe operations
MEM07007C
Perform milling operations
MEM07008D
Perform grinding operations
MEM07009B
Perform precision jig boring operations
MEM07010B
Perform tool and cutter grinding operations
MEM07011B
Perform complex milling operations
MEM07012B
Perform complex grinding operations
MEM07013B
Perform machining operations using horizontal and/or vertical boring machines
MEM07014B
Perform electro-discharge (EDM) machining operations
MEM07015B
Set computer controlled machines/processes
MEM07016C
Set and edit computer controlled machines/processes
MEM07018C
Write basic NC/CNC programs
MEM07019C
Program NC/CNC machining centre
MEM07020C
Program multiple spindle and/or multiple axis NC/CNC machining centre
MEM07021B
Perform complex lathe operations
MEM07022C
Program CNC wire cut machines
MEM07023C
Program and set up CNC manufacturing cell
MEM07024B
Operate and monitor machine/process
MEM07025B
Perform advanced machine/process operation
MEM07026B
Perform advanced plastic processing
MEM07027B
Perform advanced press operations
MEM07028B
Operate computer controlled machines/processes
MEM07029B
Perform routine sharpening/maintenance of production tools and cutters
MEM07030C
Perform metal spinning lathe operations (basic)
MEM07031C
Perform metal spinning lathe operations (complex)
MEM07032B
Use workshop machines for basic operations
MEM07033B
Operate and monitor basic boiler
MEM07034A
Operate and monitor intermediate class boiler
MEM07040A
Set multistage integrated processes
MEM09002B
Interpret technical drawing
MEM09022A
Create 2D code files using computer aided manufacturing system
MEM10004B
Enter and change programmable controller operational parameters
MEM10006B
Install machine/plant
MEM12003B
Perform precision mechanical measurement
MEM12006C
Mark off/out (general engineering)
MEM12023A
Perform engineering measurements
MEM12024A
Perform computations
MEM13007B
Maintain water treatment systems for cooling towers
MEM13014A
Apply principles of occupational health and safety in the work environment
MEM14004A
Plan to undertake a routine task
MEM14005A
Plan a complete activity
MEM15002A
Apply quality systems
MEM15024A
Apply quality procedures
MEM16006A
Organise and communicate information
MEM16007A
Work with others in a manufacturing, engineering or related environment
MEM16008A
Interact with computing technology
MEM17003A
Assist in the provision of on the job training
MEM18001C
Use hand tools
MEM18002B
Use power tools/hand held operations
MEM18003C
Use tools for precision work
MEM18004B
Maintain and overhaul mechanical equipment
MEM18005B
Perform fault diagnosis, installation and removal of bearings
MEM18006C
Repair and fit engineering components
MEM18007B
Maintain and repair mechanical drives and mechanical transmission assemblies
MEM18008B
Balance equipment
MEM18009B
Perform levelling and alignment of machines and engineering components
MEM18010C
Perform equipment condition monitoring and recording
MEM18011C
Shut down and isolate machines/equipment
MEM18012B
Perform installation and removal of mechanical seals
MEM18013B
Perform gland packing
MEM18014B
Manufacture press tools and gauges
MEM18015B
Maintain tools and dies
MEM18018C
Maintain pneumatic system components
MEM18019B
Maintain pneumatic systems
MEM18020B
Maintain hydraulic system components
MEM18021B
Maintain hydraulic systems
MEM18022B
Maintain fluid power controls
MEM18024B
Maintain engine cooling systems
MEM18025B
Service combustion engines
MEM18026C
Test compression ignition fuel systems
MEM18027C
Overhaul engine fuel system components
MEM18028B
Maintain engine lubrication systems
MEM18029B
Tune diesel engines
MEM18030B
Diagnose and rectify low voltage electrical systems
MEM18031B
Diagnose and rectify low voltage starting systems
MEM18032B
Maintain induction/exhaust systems
MEM18033B
Perform engine bottom-end overhaul
MEM18034B
Perform engine top-end overhaul
MEM18035B
Diagnose and rectify braking systems
MEM18037B
Diagnose and rectify low voltage charging systems
MEM18038B
Maintain wheels and tyres
MEM18039B
Diagnose and rectify track type undercarriage
MEM18040B
Maintain suspension systems
MEM18041B
Maintain steering systems
MEM18042C
Diagnose and rectify manual transmissions
MEM18043C
Diagnose and rectify automatic transmissions
MEM18044C
Diagnose and rectify drive line and final drives
MEM18045B
Fault find/repair electrical equipment/components up to 250 volts single phase supply
MEM18046B
Fault find/repair electrical equipment/components up to 1000 volts a.c./1500 volts d.c.
MEM18047B
Diagnose and maintain electronic controlling systems on mobile plant
MEM18048B
Fault find and repair/rectify basic electrical circuits
MEM18049C
Disconnect/reconnect fixed wired equipment up to 1000 volts a.c./1500 volts d.c.
MEM18050C
Disconnect/reconnect fixed wired equipment over 1000 volts a.c./1500 volts d.c.
MEM18051B
Fault find and repair/rectify complex electrical circuits
MEM18052B
Maintain fluid power systems for mobile plant
MEM18054B
Fault find, test and calibrate instrumentation systems and equipment
MEM18055B
Dismantle, replace and assemble engineering components
MEM18056B
Diagnose and repair analog equipment and components
MEM18057B
Maintain/service analog/digital electronic equipment
MEM18058C
Modify electronic equipment
MEM18060B
Maintain, repair control instrumentation - single and multiple loop control systems
MEM18062B
Install, maintain and calibrate instrumentation sensors, transmitters and final control elements
MEM18063B
Terminate signal and data cables
MEM18064B
Maintain instrumentation system components
MEM18065B
Diagnose and repair digital equipment and components
MEM18066B
Diagnose and repair microprocessor-based equipment
MEM18067B
Tune control loops - multi controller or multi element systems
MEM18071B
Connect/disconnect fluid conveying system components
MEM18072B
Manufacture fluid conveying conductor assemblies
MEM18086B
Test, recover, evacuate and charge refrigeration systems
MEM18087B
Service and repair domestic and light commercial refrigeration and air conditioning equipment
MEM18088B
Maintain and repair commercial air conditioning systems and components
MEM18089B
Maintain and repair central air handling systems
MEM18090B
Maintain and repair industrial refrigeration systems and components
MEM18091B
Maintain and repair multi stage, cascade and/or ultra-cold industrial refrigeration systems
MEM18092B
Maintain and repair commercial and/or industrial refrigeration and/or air conditioning controls
MEM18094B
Service and repair commercial refrigeration
MEM18095A
Maintain and repair cooling towers/evaporative condensers and associated equipment
MEM18096A
Maintain, repair/replace and adjust refrigerant flow controls and associated equipment
MEM18097A
Manufacture cavity dies
MEM18098A
Prepare to perform work associated with fuel system installation and servicing
MSAENV272B
Participate in environmentally sustainable work practices
About the fee range

The fees charged for this course may vary as training providers are free to set their own fees.

The fee range shown is indicative only. It is based on:

  • Estimated tuition fee for the whole of the course
  • Rates for local students only (not for international)
  • Available data from the Australian Course Information Register

The fees shown do not factor in concessions, government subsidies or scholarships. They also exclude other fees set by the training provider such as materials, services, and amenities.

To find government-subsidised training, look for a course location marked with this symbol Government-subsidised training available

*All fees presented on this site are correct at the time of publication; fee information is updated on a monthly basis. To obtain the most accurate quote for the course you’re considering, please contact the training provider directly.

About occupations in demand

Occupations in demand are marked with this symbol Occupation in demand. If you see a job marked with this symbol, it’s identifying a role that is currently, or is at risk of, experiencing a skills shortage.

When an occupation has a skills shortage, it means the chances of getting a job after completing your course could be higher.

The information used to identify occupations in demand is primarily sourced from Higher Education and Skills Group (HESG) in the Department of Education and Training (DET), the Australian Bureau of Statistics (ABS) and Deloitte Access Economics.